Pressure Cooker Chicken Stock Recipe (2024)

Why It Works

  • Using a pressure cooker drastically cuts down on cooking time, while producing a flavorful and gelatin-rich stock.
  • Dicing the aromatic vegetables leads to better flavor extraction.

Chicken stock is one of those small annoyances of the home kitchen. Recipes call for it all the time, which means you need a ready supply of it. That leaves you with a couple of options: Either make batches of homemade stock and keep it in the freezer, or use the store-bought stuff. Both have their disadvantages.

Homemade stock is relatively easy and, when done well, is by far the best option; it has a deep, rich chicken flavor and plenty of gelatin, which adds critical body to sauces and soups. But it's also time-consuming to make, and that can deter you from making sure you always have it on hand.

The store-bought stuff wins in the convenience department, but it has no gelatin, and the quality of its flavor is all over the map (and even the best brands don't hold a candle to homemade).

My solution in recent years has been to use a pressure cooker—whether an old-fashioned stovetop version, like the Kuhn Rikon we recommend, or an electric pressure/multi-cooker, like an Instant Pot—to make homemade stock quickly.

Not only does it cut down significantly on your total cooking time, yielding stock in less than an hour, but the resulting stock tends to be even better than a classically long-simmered one, with deeper flavor and an impressive extraction of gelatin. We know, because we've done the tests.

Why Your Pressure Cooker Is Better for Chicken Stock

The pressure cooker works by creating a sealed chamber, which allows steam to build as the contents are heated. As the steam builds, the pressure in the cooker increases. This, in turn, drives the boiling point of the water higher: Instead of a sub-212°F (100°C) simmer, you can cook your chicken stock at upwards of 250°F (120°C).

This extracts flavor from the chicken and vegetables much more rapidly, and converts collagen-rich connective tissue into gelatin in a fraction of the time as well.

Another cool feature: By raising the boiling point, you can be sure that the liquid in your pressure cooker won't boil, even though its contents will be well over 212°F (unless you allow it to over-pressurize, in which case the cooker will vent itself and boiling will occur). This stillness inside the cooker means you'll end up with a clear stock, free of the proteins and other gunk that can turn it cloudy once dispersed.

Oftentimes, I can whip up a batch of stock while I'm prepping the ingredients for whatever it is I'm making, and the stock will be ready for use by the time I'm ready to start cooking. Anything left over goes into my freezer for a future dish.

Pressure cookers tend to have a lower volume than most stockpots (especially when you factor in the cooker's max-fill line, which indicates the maximum amount of liquid you can add), but even with this limitation, it's still the most efficient way to always have the very best stock available.

How to Make Chicken Stock in a Pressure Cooker

The process of making pressure cooker chicken stock is the same as for a classic chicken stock.

You have lots of options for the chicken; breast meat gives the best flavor, but is also the most expensive to use, and therefore not something we typically recommend. Wings, backs, and raw or cooked bones with meat and cartilage attached are all good. If I can, I always try to grab some chicken feet to throw into the pot as well, since they are by far the most collagen-rich of all the parts of a chicken, leading to stock with exceptionally high gelatin content and the very best body.

For the aromatics, you just need a classic mirepoix—a combination of onion, carrot, and celery—plus garlic, some fresh herbs like parsley and/or thyme, and maybe a bay leaf. I've found that dicing the vegetables first, instead of using the larger chunks often suggested, leads to better vegetable flavor in the stock.

Once you've loaded up your pressure cooker with the chicken and aromatics, simply top it all off with water, making sure not to go above the cooker's max-fill line. It's okay if a few things stick up above the water level, since the internal heat of the pressure cooker will cook everything in there, above and below the water line.

Then seal it, bring it up to high pressure, and let it run for 45 minutes—plenty of time to coax flavor and gelatin from your ingredients.

After that, you can rapid-release the pressure or let it depressurize slowly as it cools.

One thing to keep in mind is, if you do use the cooker's rapid steam-release valve, you will kick off a vigorous boil in the cooker. That's not a deal-breaker unless the stock's clarity is a priority for you. If you want to maintain clarity, let it depressurize on its own, or, if you have a stovetop pressure cooker, run it under cold water in the sink until the pressure drops.

You'll have to skim off some fat and strain the stock, but otherwise, you'll be ready to rock, whether you're using the stock right away or freezing it for later.

April 2017

Recipe Details

Pressure Cooker Chicken Stock Recipe

Prep10 mins

Cook60 mins

Active10 mins

Total70 mins

Serves8 servings

Makes2 quarts

Ingredients

  • 4 1/2 pounds (2kg) mixed chicken parts, such as wings, backs, bones, and feet (see note)

  • 1 1/2 pounds yellow onions(about 2 large; 680g), diced

  • 12 ounces carrots(about 2 large; 340g), diced

  • 8 ounces celery (about 6 medium ribs; 225g), diced

  • 4 medium cloves garlic

  • 4 flat-leaf parsley sprigs

  • 3 fresh thyme sprigs (optional)

  • 1 bay leaf

Directions

  1. Combine all ingredients in a stovetop or electric pressure cooker and cover with cold water, about 2 quarts (1.9L). Make sure not to let liquid exceed the cooker's max-fill line; it's okay if a few things poke above the water's surface.

    Pressure Cooker Chicken Stock Recipe (1)

  2. Close cooker and bring to high pressure, then cook at high pressure for 45 minutes. Allow cooker to depressurize, either by allowing it to cool to room temperature (for the clearest stock) or by using the pressure-release valve on the cooker to rapidly vent steam. (Using the release valve will cause the stock to boil, which may result in some loss of clarity; this should not be an issue unless you're serving it as consommé or in another preparation that requires the broth to be crystal-clear.)

    Pressure Cooker Chicken Stock Recipe (2)

  3. Skim fat from stock, strain, then use as desired or freeze for up to 6 months.

Special Equipment

Electric or stovetop pressure cooker, fine-mesh strainer

Notes

You can use many different chicken parts to make stock. The breast meat produces stock with the best flavor, but the thinnest body; plus, it's expensive. A better option is to use cheaper, collagen-rich parts, like wings, backs, and feet (using feet will produce the most gelatin-rich stock). Any bone scraps you've been saving, whether raw or cooked, can also go in the pot.

Pressure Cooker Chicken Stock Recipe (2024)

FAQs

What is the correct ratio for chicken stock? ›

That minimum ratio—a pound of chicken per quart of water—was sufficient to extract enough gelatin from the wings to give me the loosely gelled stock above. If you can pack in even more chicken and aromatics, your stock will only get richer and more gelatinous.

What is the ratio of chicken stock to water? ›

Store Bought or Homemade Chicken Stock

The store-bought chicken stock can be too salty, so make sure to dilute with water in a ratio of 2 parts broth to 1 part water (4 cups broth: 2 cups water) as a good starting point. You can always adjust the flavor to your liking by tasting the broth.

Do pressure cookers make better stock? ›

Not only does it cut down significantly on your total cooking time, yielding stock in less than an hour, but the resulting stock tends to be even better than a classically long-simmered one, with deeper flavor and an impressive extraction of gelatin.

How many pounds of pressure do you need for bone broth? ›

Place the rocker or weighted gauge onto the pressure canner and process at 10 pounds of pressure for a weighted gauge or 11 pounds of pressure for a dial gauge (adjust for your elevation). Process pint jars for 20 minutes and quart jars for 25 minutes, maintaining 10 or 11 pounds of pressure the entire time.

How much is 4 cups of chicken stock? ›

So 4 cups = 1 litre. But if you're going by 8 oz = 1 cup, that would be ~ 236 ml, which is how you're getting 1.888 liters.

How much chicken stock for 8 cups of water? ›

If you plan on using the chicken stock in recipes calling for chicken broth, dilute the stock using 1 cup of water to 1 cup of stock so you will get 8 cups/2 quarts of less concentrated stock that is *so good* in soups.

How many chicken stock cubes per cup of water? ›

The suggested mix is 1 cube per 2 cups water. You can go with anywhere from 1.5 to 3 cups water depending upon how strong or weak you want the flavor. If in doubt, start with 1 cup water and adjust from there to the taste you like.

What's the difference between chicken stock and chicken broth? ›

Stock is generally made from bones, and broth is generally made from flesh. In both cases, they are often supported with aromatic vegetables, but in the case of stock, left unseasoned for maximum flexibility in recipes, whereas broth will usually contain at least salt and pepper.

Is chicken stock better in a pressure cooker or slow cooker? ›

Chicken Broth Comes Out Better on the Stovetop or Pressure Cooker, Not the Slow Cooker. If you want the most flavorful, full-bodied chicken stock you can make at home, do it on the stove or with a pressure cooker, and save your slow cooker for something else.

How do you can stock in a pressure cooker? ›

Process the jars at 10 pounds of pressure, pint jars for 20 minutes and quart jars for 25 minutes. Turn off the heat and let the pressure drop back down to 0 pounds. Remove the pressure gauge and let the steam vent for 10 minutes. Remove the canner lid and let the jars stand in the hot water for another 10 minutes.

Can you overcook chicken stock? ›

You can overcook chicken broth.

In fact, I have many times. If the broth is simply unseasoned bones and skin, it can be cooked for a long time without developing a bad flavor. However, a broth that includes vegetables and herbs can become bitter or develop an unpleasant flavor if simmered too long.

Can you overcook broth in pressure cooker? ›

So, just a heads up. It's absolutely possible to overcook Instant Pot bone broth. I don't say that to panic you – just to make you aware! Keep an eye on your cook time and especially your depressurizing time.

Can too much bone broth be bad? ›

While bone broth is generally considered safe to consume, there are some potential risks to be aware of. Lead contamination. Some studies show elevated levels of lead in bone broths, which can be harmful to health if consumed in large amounts.

Is it better to make bone broth in a slow cooker or pressure cooker? ›

In conclusion, we enjoyed the flavor and the yield of the slow cooker the best! But, the Instant Pot version was the all-around best for time, taste, and yield. And stove top is a classic method which get's the best of both flavor and time.

What is the ratio of broth to stock? ›

You can always substitute equal parts broth for stock. Since stock is generally thicker and more flavorful, you might find your favorite recipes get more of a flavor boost by using stock.

What is the ratio for stock ingredients? ›

Basics: The basic ratio I use for making stock is 4:1 1/2:1/2:1/2. That's 4 pounds of bones and meat, 1 1/2 pounds of onions, and 1/2 pounds each of carrots and celery. This ratio works for beef, chicken, turkey, ham/pork, veal, whatever the meat is and makes about 2 quarts of stock.

What is the general ratio of ingredients for making stock? ›

For example, a ratio for preparing a stock calls for 3 parts liquid to 2 parts bones (3 lbs. water to every 2 lbs. of bones), which means converting the water to a liquid measure (knowing that a one-pint liquid measure equals one pound takes out the mystery).

What is the correct proportion of basic ingredients in a stock? ›

Expert-Verified Answer. The correct proportion of basic ingredients in a stock is 50% bones, 25% mirepoix, and 25% water.

Top Articles
Latest Posts
Article information

Author: Geoffrey Lueilwitz

Last Updated:

Views: 5973

Rating: 5 / 5 (80 voted)

Reviews: 87% of readers found this page helpful

Author information

Name: Geoffrey Lueilwitz

Birthday: 1997-03-23

Address: 74183 Thomas Course, Port Micheal, OK 55446-1529

Phone: +13408645881558

Job: Global Representative

Hobby: Sailing, Vehicle restoration, Rowing, Ghost hunting, Scrapbooking, Rugby, Board sports

Introduction: My name is Geoffrey Lueilwitz, I am a zealous, encouraging, sparkling, enchanting, graceful, faithful, nice person who loves writing and wants to share my knowledge and understanding with you.